After successfully installing your SmartLocker by following the instructions provided here, the next step is to connect it to the bed using the Spaces App.
Connect a SmartLocker to the bed
Open Spaces App
Go to the "Common" Section
Add the new Common Area
Choose "not connected" room
Stay close to the Smart Locker and tap on the screen to engage.
Select the device - Locker Lock
Press the SmartLocker's name with the status "ready"
Once this process is completed, press the button "Done"
While connecting the SmartLocker, an admin PIN will be set automatically, or you will be asked to enter one
Go to the common area settings> click on the 3-dots (top-right) and turn on the toggle "Use as Locker"
The final step is to map the beds to the Smart Locker, here's how you can do it:
Choose the Room
Click "Customization" from the three dots
Click "Beds" Section
Choose the bed and activate the Locker toggle
Note
Make sure that you have the latest version of the Spaces App.